01_Series07 page 2/10

このページは 01_Series07 の電子ブックに掲載されている2ページの概要です。
秒後に電子ブックの対象ページへ移動します。
「電子ブックを開く」をクリックすると今すぐ対象ページへ移動します。

概要：
Design Integrity :?Heavy duty top guiding with no bottom guide to obstruct seatbore and potentially trap debris.??Large diameter stems.Clamped bonnet and seat ring gaskets are fully retainedfor easy m....

Design Integrity :?Heavy duty top guiding with no bottom guide to obstruct seatbore and potentially trap debris.??Large diameter stems.Clamped bonnet and seat ring gaskets are fully retainedfor easy maintenance.Quality Manufacturing :? Rigorously tested to ensure specified performance on site. Figure 2. Single Contoured Plug? Quality assurance system in accordance with ISO 9001. (Small size)?Optional full NACE MR-01-75 certification.Scope of DesignEnd connection sizes : 1/2”to 16”( 15mm to 400mm )End Connection Styles :ANSI,DIN and BS flanged RF.FF.RTJ ( and other grooved designs).Welded profiles including butt weld, socket,etc.,clamped andscrewed designs. other requirements available on request.Figure 3. Single contoured plugup to 6”(Unbalanced)Valve Body Ratings :ANSI 150 to ANSI 600 ( PN 20 to PN100), DIN/BS4504PN10 to PN100as standard. other requirements available on request.Design standards :ANSI B16.34 and ASME section VIII (for body/bonnet bolting)Trim Design Options :Full and reduces trim, SP, DP. and BP available as standard.Multi hole cages and attenuate. silencers are available forFigure 4. Single contoured plug(Unbalanced, Soft seat)specific applications.2